supply Plastic TPU Resin IS-F30

TPU Resin IS-F30 Thermoplastic Polyurethane Resin Appearance: White granular For Printing ink, fabric combination, etc.

TECHNICAL DATA SHEET

TPU RESIN IS-F30

 

Product: Thermoplastic Polyurethane Resin 

Type: IS-F30 

Specification

Appearance: White granular

Density(g/cm³): 1.2

Hardness (Shore A): 90~95

Viscosity (mPa.s), (15%, MEK,23°C): 50~90 mPa.s

Soften point (°C) :70~90

Melting point(g/10mins, 150°C): 20~30

Tensile Strength (mPa): 30Min

Elongation Rate (%): 300Min

Method of Application:

1. Melting directly

Before melting, please pretreat it firstly by dehumidify and dry.

Recommend temperature between 150°C-180°C.

2. Dissolve it by solution.

  Recommend to use 10%~35% solid, appropriate heating and stirring could improve the effect of dissolution.

The solubility of the all kinds solvents as below:

Item	For example	Solubility
Ketones	Acetone, butyl ketones, cyclohexanone, etc.	Can be dissolved easily
Esters	Acetic acid ethyl ester, butyl acetate, etc.	Can be dissolved easily
DMF		Can be dissolved easily
THF		Can be dissolved easily
Aromatic hydrocarbons	Toluene, xylene, etc.	Swelling
Alcohols	Ethanol, glycerin, etc	Swelling

Remarks:

1)      When making adhesive, the content of water in solvent should be less than 1‰.

2)      It’s ok if mix several kinds of solvent.

3)      If use swelling type solvent, it’s better to add the solution easy to be dissolved firstly, after TPU was dissolved totally, then add swelling type solvent again..

 

Usage:

For Printing ink, fabric combination, PU adhesive, heating transfer painting, etc.

supply Plastic TPU Resin IS-F30